16 Patient Data Management
Operator’s Manual 16 - 5
16.1.10Image Analysis
In the image analysis status, you can view, zoom, perform post processing and measurements, add
comments and perform cine review for a stored image (FRM or CIN format). The operation steps
are the same as those for real-time scanning; please refer to relevant sections for details.
To enter image analysis
• In the image scanning or freeze status, double-click a thumbnail stored in this exam to enter the
image analysis status; or
• In the image review status, double-click the selected thumbnail to open the image.
To exit the image analysis
• Press <Freeze> to exit and enter the real-time scan status.
• Press [Return] to exit from the image analysis to the Review status.In image analysis status,
the selected image is displayed on the screen, and the thumbnails of the same exam are
displayed on the thumbnail area, you can turn pages using the buttons on the right side of the
thumbnail.
16.1.11Sending Image File
Data saved this way can only be reviewed on the PC and cannot be restored to the ultrasound
system.
Perform the following procedure:
1. Do one of the following to bring up the “Send To” screen:
– In the main screen, select a stored image thumbnail and click on the upper right corner
of the image.
– In the iStation screen, select a stored image and click .
– In Review screen, click to send patient data to an external memory device.
– In the Review screen, select a image and click [Send To].
2. Select from the destination:
Item Description
USB/iStorage For external memory devices (e.g. USB memory devices, DVD
recorder) or network storage server, you can set:
• PC format transfer.
• DCM format transfer
•Cine Zoom Mode.
• Export the report or the report format.
• Hide patient information.
DICOM/Print Select the DICOM Storage or Print server.
MedSight Send the image to MedSight as necessary.
NOTE:
The file sent to MedSight is transferred into PNG format, and
the cine file is transferred into AVI format.
To Next Page
Loading...
