Mindray Consona N6 - 7.1.3 About the probes; 7.1.4 MPR

7 3D/4D
Operator’s Manual 7 - 3
7.1.3 About the probes
A 2D imaging probe can be applied for Smart 3D imaging, however, to realize Static 3D imaging,
4D imaging, iPage, SCV, CMPR, Color 3D or Niche, a volume probe should be selected.
7.1.4 MPR
MPR represents three different views of 3D image.
In the quad display format view, the screen displays 3 MPRs (A, B and C) and the 3D image.
On the touch screen, the current window’s icon is highlighted; as shown in the figure below, A
window is the currently activated window.
A, B, C sectional images are corresponding to the following sections of 3D image.
• Section A: corresponds to the 2D image in B mode.Section A is the sagittal section in fetal face
up posture, as shown in the figure A above.
• Section B: it is the horizontal section in fetal face up posture, as shown in the figure B above.
A A window B B window
C C window 3D 3D window (VR)
C
A
B
3D
A B
C VR