2 - 2 Operator’s Manual
2 System Overview
• Does the equipment has any defibrillation-proof applied parts:
ECG is equipped with the applied part of defibrillation protection.
• Permanently installed equipment or non-permanently installed equipment:
Non-permanently installed equipment
2.4 Product Specifications
The functions described in the operator’s manual may vary depending on the specific system
purchased.
2.4.1 Power supply
Power input
• Voltage: 100 - 240 VAC
• Frequency: 50/60 Hz
• Power input: 6.2-2.0A
• Battery voltage: 14.4 VDC, 6600 mAh
Power output
• Voltage: 100 - 240 VAC
• Frequency: 50/60 Hz
• Power consumption: 240VA (This is the maximum auxiliary output power of the outlet. When
the peripheral device is connected to the outlet, ensure that the maximum auxiliary output
power does not exceed this threshold. Otherwise, the system may be damaged.)
2.4.2 Environmental Conditions
Do not use this system in conditions other than those specified.
• Operating conditions
– Ambient temperature: 0 °C ~ 40 °C
– Relative humidity: 20% ~ 85% (no condensation)
– Atmospheric pressure: 700 hPa ~ 1060 hPa
• Storage and transportation conditions
– Ambient temperature: -20 °C ~ 55 °C
– Relative humidity: 20% ~ 95% (no condensation)
– Atmospheric pressure: 700 hPa ~ 1060 hPa
2.4.3 Dimensions and Weight
• Dimensions (The monitor and the control panel are kept to a minimum position):
Length: 840±40mm, Width: 513±10mm, Height: 994±20mm
• Weight: ≤65.0 kg (Standard configuration)
To Next Page
Loading...
