4 - 2 Operator’s Manual
4 Setup
4.1.1 Region
Set the hospital name, language, time zone, time format and system date/time.
4.1.2 General
Set patient information, exam setup, screen saver, display, keyboard sound setting and so on..
Access Control To set the user account control relevant information.
Scan Code To set the code parameters for barcode reader.
Workstation To set the Workstation quick key.
Item Description
Item Description
Hospital
Information
To set the hospital-relevant information such as name, address, telephone, and so
on.
Load Logo Import image for logo loading.
NOTE:
For a better display effect, please try to use an BMP image with 400*400 pixels.
Language To select a language (input) for the system.
Time Zone To select the time zone.
System Date To set the date for the system.
Date Format To set the date format.
System Time Move the cursor over the corresponding field and enter the time manually using the
keyboard, or, move the cursor over the time segment and press <Set>, then increase
or decrease the required value by clicking the icons on the right side.
Time Format To select the time format.
Time Synch To assign a time server and make the time of the ultrasound machine consistent
with the server.
Type Item Description
PATIENT
INFO
Patient Banner
Display Content
To select whether to display the available patient information
items on the screen.
H&W Unit To set the unit for calculating patient height and weight.
Surface Formula To set the surface formula.
Font Size (For
Storage)
To set the font size in the Patient Banner Display Content for
storage.
Status after Freeze To set the system state after the image is frozen.
Storage Beep
Vo l u m e
Set the key volume for saving single /multi-frame image.
To Next Page
Loading...
