4 Setup
Operator’s Manual 4 - 3
EXAM
SETUP
Status after exam
ends
To set the system status when an exam ends.
Auto Screenshot of
Report Page by Page
After selected, perform measure application and save single
frame image, then end the patient exam, the system will save
the report image in iStation.
Sending/printing
after End Exam
Select whether to automatically archive the exam data to the
DICOM server for storage/print.
Send SR after End
Exam
Select whether to automatically send structure report to the
DICOM server.
Disable Recycle Bin After checking this option, the deleted data will not go to the
recycle bin.
NOTE:
After disabling the recycle bin, the deleted data cannot be
recovered.
Speed up the export
of exams
Select whether to speed up the export of exams after
prospective saving the cine.
Remind exams
backup after
To set number of days to remind the operator of exam backup.
Maximum number of
exams to be kept
To set the maximum number of exams to be kept. If the actual
number is larger than the preset number, the latest exam will
replace the earliest exam.
NOTE:
The patient exams which exceed the preset maximum will
be deleted and unrecoverable. It is recommended to perform
patient data backup before enabling this function to avoid
data loss.
SCREEN
SAVER
Screen Saver • Select the different saver methods to the system.
• After enabling the screen saver, check “Select Picture-
Mindray” to select the image from the system. Or click
[Preview] to select the image on your own; you can set the
interval time for the screen saver slideshow in the drop-
down list beside “Interval”.
• To set the waiting time before the system enters dormancy
status in the drop-down list beside “Wait”.
• The system enters screen saver automatically if the system
waiting time exceeds the screen saver already set.
Standby The system enters screen saver automatically if the system
waiting time exceeds the screen saver already set and standby
time.
DISPLA
Y
Brightness auto
adjustment
To set the brightness/contrast of the main screen and the touch
screen according to the conditions.
LCD To set the brightness and the contrast of the main screen, or
restore to the default.
TouchPanel After selection, the system restores the touch screen settings
back to factory.
Type Item Description
To Next Page
Loading...
