4 - 14 Operator’s Manual
4 Setup
• Advanced Analysis Mode
Select “Advanced” from “Analysis Mode” drop-down list: user enters scan barcode example
and regular expression and click [Match], the system will match scan barcode example with
regular expression automatically, and if which is matched successfully, the scan item will
display the barcode by separators.
Append Options
The information of operator or diagnostician can be appended after selecting the check box.
For example, after scanning a 1D barcode of an operator or diagnostician, the obtained data is A,
and A will be displayed in “Operator” or “Diagnostician” item in Patient page automatically.
After scanning a 1D barcode of an operator or diagnostician for a second time, the obtained data is
B, and A will be appended by B in “Operator” or “Diagnostician” item in Patient page
automatically.
Default Item
If the default item is set to “No”, and both the 2D and 1D barcodes fail to be matched, the obtained
data of the barcode is input as a string of characters. After selecting a default item from the drop
down list of “Default Item”, the obtained data of the scanned barcode will be displayed in the
corresponding selected default item.
For example, if the default item is set to “Patient ID”, and both the 2D and 1D barcodes fail to be
matched, the obtained data is displayed in the “Patient ID” item in Patient page automatically.
Import/Export
Set the barcode by importing/exporting configure file. You can contact mindray service engineer
also.
Parameters • Input a barcode example, and you can change the information of
Patient ID, Other ID, First Name, Last Name, Middle Name, Birth
(Day), Birth (Month), Birth (Year), Age, Gender and etc. in the
“Content” list.
Note: Ignore item is used to add one line below the selected item to
hide unimportant patient information.
• Set the start and end position of each item via separators. After
inputting a barcode example, you can select item separators from the
drop-down list of the Separator. (Only separators that are input in the
field box of the Scan Barcode Example can be displayed in the drop-
down list of the Separator.)
Note: You can customize the age unit of Birth (Day), Birth (Month),
Birth (Year) in the Content column. If the DOB provided by the patient
contains only digit, the system displayed an auto-generated age.
Move Up/Down Move up or Move down a selected item.
Add/Delete Add or delete a selected item. (Only the default item can be added or
deleted.)
Load default Restore the parameter value to the default value.
Age Unit Select an age unit from the drop-down list of the “Age Unit”: Year,
Month, or Day.
Male/Female Input the customized gender symbol besides the Male and Female field
box, such as Male (M) or Female (F).
Item Description
To Next Page
Loading...
