4 - 18 Operator’s Manual
4 Setup
You may configure more than one measurement package for current exam mode. Under actual
measurement status, select [Library] on the touch screen if necessary.
Click [Advanced] on the [Measure] page to enter the “Add New Package” page.
• [Available Items]: shows application packages configured in the system but not yet assigned to
the current mode.
• [Selected Items]: shows application packages assigned to the current exam mode. If more than
one package is assigned to the current exam mode, select [Library] on the touch screen to
switch between different packages.
Package editing includes Creating Packages, Add/Remove Items, Deleting Measurement Packages,
Setting Default Packages, Adjusting Package Positions.
• Creating Packages: Click [New] and enter a name for the new package in the dialog box pop-
up. Click [OK] to confirm, the new package displays in the [Available Items] list.
• Adding/Removing Packages: Add/remove the package by clicking [>], [>>], [<] and [<<].
• Deleting Packages: Select a package from the [Available Items] list, click [Delete]. To delete
an item from [Selected Items], you need to move it to the [Available Items] first.
• Setting Default Packages: Select a package from the [Selected Items] list, then click [Default].
The default package is marked with a √.
The default package displays when entering the [Measure] page.
The measurement menu of the default package (corresponding to the exam mode) displays
when entering the measuring status.
• Adjusting Package Positions: Select a package from the [Selected Items] and click [Move Up]/
[Move Down] to adjust the sequence that the packages in the menu are arranged in.
Measurement Menu Preset
The following operations are available.
• Adding/Removing Items: Add/Remove the general measurement item using the [>], [>>], [<]
and [<<].
• Setting Default Items: Select an item from the [Selected Items] list, click [Default]. The
defaulted item is marked with a √.
To deselect the default tool, select it and click [Default] or set another item as the default.
If a particular item is set as the default item, it automatically displays the submenu of the study
when entering this measurement menu.
• Adjusting Item Positions: Select an item from the [Selected Items], click [Move Up]/[Move
Down].
The order in the list is also the item position in the menu.
User-defined Measurement
Perform the following procedure:
1. Select the [Measure] tab page.
2. Click [New].
To Next Page
Loading...
