4 Setup
Operator’s Manual 4 - 29
• The device name is random. If the server name is same with that in the DICOM server list, the
information “the server added already exits”, click [OK] to retype the name.
• 4001, 6000, 3001, 6555 cannot be set as the port.
• IP address should be the address of the remote server.
DICOM local preset items are described as follows:
Add a Server
Perform the following procedure:
1. Enter the server device name and IP address.
2. Click [Ping] to check the connection.
3. Click [Add] to add the server to the device list, and its name and address are displayed in the
list.
Item Description
Local Host
DICOM
service
property
AE Title Application Entity title.
Port Communication port, DICOM communication port.
PDU Maximum PDU data package size (not need to change),
ranging from 16384 to 65536; if the value is less than 16384
or greater than 65536, the system automatically sets it to the
value 32768.
DICOM output
charasets
Select an character set for DICOM output according to the
local PACS workstation.
TLS Port Set the TLS port.
TLS Server Setting Import the encryption key/certificate.
TLS Client Setting • After importing TLS certificates, and selecting Verify
Certificate check box, the system verifies the
effectiveness of the TLS function in the DICOM storage,
print, and worklist services.
• Import trusted certificates, or delete certificates.
Server
Setting
Device Name of the device supporting DICOM services.
IP Address IP address of the server.
Ping You can ping the other machines after you entered the
correct IP address.
Besides, you can select a server in the Device list to ping it.
Device List Displays the added device.
Delete Click to delete the selected server (s) in the device list.
Set DICOM Service Provides server settings of DICOM service, for details,
please refer to the following chapters.
Set DICOM Strategy Click to enter the configure the strategy screen.
Log Level For engineer use only.
Capture
To Next Page
Loading...
