Mindray DPM 6 - Factory Maintenance; Accessing Factory Maintenance Menu; Drawing Waves; Recorder

3-29
3.12 Factory Maintenance
3.12.1 Accessing Factory Maintenance Menu
To access the factory maintenance menu, select [Main Menu]→ [Maintenance >>] →
[Factory Maintenance]and then enter the required password.
The [Factory Maintenance] menu is shown below.
3.12.2 Drawing Waves
There are two methods to draw waves.
 Color: selecting Color will have smoother waveforms.
 Mono: selecting Mono will have a wider viewing angle.
3.12.3 Recorder
To enable/disable the recorder, select [Recorder] and toggle between [On] and [Off].
CAUTION
z The recorder is disabled if [Recorder] is switched off in the [Factory Maintenance]
menu.