System Installation 3-23
7. Click [Save] to exit, and the system will shut down.
Parameter Description
Advanced
Sets the sub URLs of "QVIew full" and "QView lite".
The sub URL is set by default. Users can modify the
sub URL and click [Apply] to exit the "QView sub URL
setting" window.
Enable Direct Report
Sets whether to open the Q-Path server through
pressing the <Report> key.
Worksheet Only
Sets whether to directly enter the Worksheet interface
after opening the Q-Path server.
P
Worksheet
Sets whether to display the Signature field box in a
worksheet.
Press <Report>→[WorkSheet] or press <Review> →
[Report] → [WorkSheet], enter the worksheet
password in the field box, and click [OK].
Users can query the corresponding worksheet by
searching the worksheet password in the Q-Path
server.
Exam
Sets whether to input the worksheet password after
ending an exam.
Password Visible Sets whether the password is visible.
Import
Imports a user-defined worksheet template from the
USB storage (downloaded from the Q-Path server).
Backup Backs up worksheets to the USB storage.
Restore
Restores the backup worksheet template from the
USB storage to the ultrasound system.
Delete Deletes a worksheet template.
Restore Factory Restores the worksheet template to the default state.
The operating procedures are as follows:
1. Set the DICOM storage server.
2. Send stored images or worksheet reports from iStation/Review/thumbnail area to the Q-Path
server.
3. Press the user-defined key for Q-Path or press <Report> to open the Q-View browser.
4. Log in to the Q-Path server through the Q-View browser to check the stored images and
worksheet reports.
5. Click [Esc] to exit the Q-View browser.
Note: the following prompt will display every time you enter Q-Path after powering on the machine.
Select "Yes" to enter the website service.
To Next Page
Loading...
