Passport V Operating Instructions 0070- 0-0704-02 15 - 3
Trends List Trends
15.3 List Trends
The List Trend display allows the user to view a tabular list of stored patient vital signs and
anesthetic gas data. To access this display from the normal monitoring screen, press the
TRENDS key twice. To access this display from the Quick Trend display, press the
TRENDS key once. This display may also be accessed from the other trend displays via a
menu choice. When the maximum number of entries has been reached, the oldest entry will
be deleted from the trend record in order to allow storage of a new entry.
FIGURE 15-2 List Trends
The left side of the List Trend display contains menu items for scrolling and access to other
displays. Trend data is listed from newest to oldest. Use the horizontal scroll feature to view
older data. Use the vertical scroll feature to view all the rows of data.
NOTE: When scrolling vertically, the first row of data (HR) remains
displayed and does not scroll.
Scroll bars along the right and bottom sides of the trend display indicate the position of
viewed data in relation to the rest of the database.
The top row of the List Trend display contains markers which indicate that the entry was
triggered by an alarm violation or by pressing the MARK EVENT key. These markers are
red for priority 1 alarms, time adjusted events, and data transfered events; yellow for priority
2 alarms; and green if initiated by pressing the MARK EVENT key.
Trend data in violation of an alarm is also highlighted according to the priority of the alarm.
The data is red for priority 1 alarms and yellow for priority 2 alarms.
If data for a parameter is not available at the time of the trend entry, the data field will be
dashed. If an NIBP reading could not be obtained or an invasive pressure channel was not
zeroed at the time of the trend entry, the data field will contain “XXX”.
0
To Next Page
Loading...
Need help?
General
