Mindray Passport V Operating Instructions

Setting-up Patients Patient Management
3 - 2 0070- 0-0704-02 Passport V Operating Instructions
3.2 Setting-up Patients
1. Turn the monitor on using the ON/OFF switch. Ensure the previous patient’s data has
been removed from the monitor by discharging previous patient.
2. Connect the patient to the monitor, apply appropriate accessories such as ECG
electrodes, blood pressure cuff, etc.
3. Enter patient information into the Passport V via the Patient Menu, check patient
size.
4. If desired, press the START key to initiate a non-invasive blood pressure measurement.
3.2.1 Patient Menu
To display the Patient Menu:
1. On the front panel:
Press the Normal Screen key to return to the normal screen.
2. On the normal screen:
Select Patient by rotating the Navigator Knob.
3. Use the Navigator Knob to enter patient information. Monitor settings are stored for
each patient size.
NOTE: Verify monitoring settings when the patient size is changed.
FIGURE 3-1 Patient Menu
0

Mindray Passport V Specifications

General

Brand	Mindray
Model	Passport V
Category	Health Care Products
Language	English