Mindray Passport V Operating Instructions

Passport V Operating Instructions 0070- 0-0704-02 19 - 35
Appendix Electromagnetic Capability
Voltage Dips and Short Interruptions
Complies with the requirements of IEC 61000-4-11: 2001 for voltage dips and short
interruptions, namely, 0 V for 0.5 cycle, 40% of V for 5 cycles, 70% of V for 25 cycles 0V for
0.5 cycles.
Harmonic Current
Complies with the requirements of EN 61000-3-2:2005 Class A.
Voltage Fluctuations and Flicker
Complies with the requirements of EN 61000-3-3:2005.
19.15.2 Passport V
The Passport V meets the requirements of IEC 60601-1-2/EN 60601-1-2.
NOTE: The Passport V needs special precautions regarding EMC
and needs to be installed and put into service according to
the EMC information provided below.
NOTE: Portable and mobile RF communications equipment can
affect the Passport V. See tables 19-1 through 19-4 that
follow.
TABLE 19-1
GUIDANCE AND DECLARATION - ELECTROMAGNETIC EMISSIONS
The Passport V is intended for use in the electromagnetic environment specified below. The
customer or the user of the Passport V should assure that it is used in such an environment.
EMISSIONS
TEST COMPLIANCE ELECTROMAGNETIC ENVIRONMENT - GUIDANCE
RF emissions
CISPR 11
Group 1 The Passport V uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11
Class A The Passport V is suitable for use in all establishments
other than domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes
Harmonic
emissions IEC
61000-3-2
Class A
Voltage
fluctuations/
Flicker
emissions IEC
61000-3-3
Complies
0

Mindray Passport V Specifications

General

Brand	Mindray
Model	Passport V
Category	Health Care Products
Language	English