Discharging a Patient Patient Management
3 - 4 0070- 0-0704-02 Passport V Operating Instructions
Entering a Patient’s Date of Birth
To enter the patient’s Date of Birth complete the following steps:
1. Open the Patient Menu and scroll down through the menu using the Navigator
Knob.
2. Select Date of Birth from the menu. Press the Navigator Knob and a pop-up
window will emerge with day, month and year choices for Date of Birth.
3. To enter the patient’s Date of Birth, turn the Navigator Knob and scroll until you
reach the desired dates.
4. When finished with the Date of Birth, press the Navigator Knob to return to the
Patient Menu.
3.3 Discharging a Patient
To discharge a patient from the Passport V:
1. On the front panel:
Press the Discharge key
or
On the normal screen:
Select Patient
〉 Discharge
Discharging a patient from the Passport V clears the following:
• Patient information (except Patient Size and Bed No.)
• Physiological alarms and technical alarms
• Prompt messages irrelevent with the patient management
• Corresponding history data (includes Trend data, Events, OxyCRG Trend data, Dose
calculations)
• Operations in process (includes local printing and NIBP measurement)
• Start the Bed # with a room number that has a fixed number of digits. For example,
if the maximum number of digits that is used in numbering the rooms is 4, then for
room 102, a leading zero would be added to get the 4th digit - 0102.
• Follow the room number with a letter to identify the particular bed within the room.
For example, a room with 2 beds would have bed A and bed B.
• An example of a complete “Bed #”: Bed B in room 513 (in a facility where there
are up to 4 digits in a room number) would be identified as 0513B.
0
To Next Page
Loading...
Need help?
General