Passport V Operating Instructions 0070- 0-0704-02 19 - 41
Appendix Electromagnetic Capability
19.15.4 Gas Module 3
The Gas Module 3 meets the requirements of IEC 60601-1-2/EN 60601-1-2.
NOTE: The Gas Module 3 needs special precautions regarding EMC
and need to be installed and put into service according to
the EMC information provided below.
NOTE: Portable and mobile RF communications equipment can
affect the Gas Module 3. See tables 19-6 through 19-9 that
follow.
TABLE 19-6
GUIDANCE AND DECLARATION - ELECTROMAGNETIC EMISSIONS
The Gas Module 3 is intended for use in the electromagnetic environment specified below. The
customer or the user of the Gas Module 3 should assure that they are used in such an environment.
EMISSIONS
TEST COMPLIANCE ELECTROMAGNETIC ENVIRONMENT - GUIDANCE
RF emissions
CISPR 11
Group 1 The Gas Module 3 uses RF energy only for their
internal function. Therefore, their RF emissions are very
low and are not likely to cause any interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class A The Gas Module 3 is suitable for use in all
establishments other than domestic establishments and
those directly connected to the public low-voltage power
supply network that supplies buildings used for domestic
purposes.
Harmonic
emissions IEC
61000-3-2
Class A
Voltage
fluctuations/
Flicker
emissions IEC
61000-3-3
Complies
0
To Next Page
Loading...
Need help?
General
