“Neutral Measurement” Application The initialization data block contains the reference sample quantity and reference
weight.
--------------------
Ref 2 o
wRef + 1.200 kg
G# + 14.700 kg The results block contains gross, net and tare weight
T + 0.300 kg
N + 14.400 kg
Qnt 12 o and the piece count as a result.
--------------------
“Weighing in Percent” Application The initialization data block contains the reference percentage and reference
weight.
-------------------- Percentage = residual
pRef 100 %
Wxx% + 2.100 kg
G# + 1.859 kg The results block contains gross, net and tare weights, as well as the percentage,
T + 0.200 kg which is shown as either the loss or the residual amount.
N + 1.659 kg
Prc 79 % and the piece count as a result.
--------------------
-------------------- Percentage = loss
pRef 100 %
Wxx% + 2.100 kg
G# + 0.641 kg The results block contains gross, net and tare weight
T + 0.200 kg
N + 0.441 kg
D 21 % and the piece count as a result.
--------------------
110 Operating Instructions Combics Complete Scales
Data Interfaces
To Next Page
Loading...
