Minebea Intec CAS-SPC Series - Weighing Platform Configuration; Device Parameters Overview; SQmin Function Configuration

Operating Instructions Combics Complete Scales 23
Configuring Weighing Platforms
Device Parameters
WP1
IS-485
Calibration/Adjustment unit
Grams /g
Kilograms /kg
Tons /t
o Pounds /lb
Menu items “Adapt lter“ - “Factory settings: only bal. func,“
see the “Setup Overview (Parameters)“ section
O
COM-1 (when the WP is assigned to this interface)
COM-2 (when the WP is assigned to this interface)
UNICOM (only if available)
WP2, see the “Setup Overview (Parameters)“ section
RS-232
1
) similar to »IS-485« menu for WP1
RS-485
1
) similar to »IS-485« menu for WP1
o O
COM-1 similar to WP 1
COM-2 similar to WP 1
COM-1, see the “Setup Overview (Parameters)“ section
COM-2, see the “Setup Overview (Parameters)“ section
“Control I/O ports“ - “Terminal data,“ see the “Setup Overview (Parameters)“ section
SQmin
SQmin input
SQmin WP1
SQmin WP1 0.000 kg
SQmin WP2
SQmin WP2 0.000 kg
SQmin WP3
SQmin WP3 0.000 kg
Display
No
o Yes
GMP print
o No
Yes
Alibi memory
2
)
Clear alibi memory
Yes
o No
Alibi memory period
In days 90
1
) Equipment version: – then saved internally
2
) Only if alibi memory is available (option)