Weighing with numeric entry of tare value and printing the results.
t Press the e key to turn on the indicator.
y The automatic self-test runs.
When the weight readout is shown, the scale is ready to operate and
automatically set to zero. With no load on the platform, you can zero the
weighing platform at any time by pressing (.
t Press the .25 key to enter a known tare weight via the keypad (in this
example, 0.25 kg).
t Press the ) key to apply the tare weight.
t Place the container with sample on the platform.
t Read the results.
t Press the L key to toggle the display to the net weight value.
y The display shows the gross weight (in this example, 0.250 kg for the container
plus 2.000 kg for the sample).
82 Operating Instructions Combics Complete Scales
Operation
To Next Page
Loading...
