Tare the scale by placing a container on the weighing platform
t Press the e key to turn on the indicator.
y The automatic self-test runs.
When the weight readout is shown, the scale is ready to operate and
automatically set to zero. With no load on the platform, you can zero the
weighing platform at any time by pressing (.
t Place empty container on the scale.
y The container weight is displayed.
t Press the ) key to tare the scale.
Note: If the automatic tare function is enabled, you do not need to press the
) key. The tare weight is saved automatically when you place the container
on the platform.
t Wait until a zero value is displayed together with the “NET“ symbol (net weight).
t Place sample on the platform.
t Wait until the weight unit symbol is displayed (indicating stability).
t Read the weight value.
Operating Instructions Combics Complete Scales 81
Operation
To Next Page
Loading...
