12. Specifications
MiR250 Dynamic Integrator Manual (en) 09/2023 - v.2.1 ©Copyright 2020–2023: Mobile Industrial Robots A/S. 125
Storage temperature (3 month
storage)
-20–45°C
Operation temperature 5–40°C
Floor surface condition Clean and dry
Floor to wheel frictional coefficient 0.60–0.80 (recommended)
Material the robots cannot detect
reliably
Transparent, translucent, glossy, reflective, and light emitting
1
Optimal light conditions
Even and steady lighting (strong directional light can cause the
robot to detect non-existent obstacles)
1
We recommend either avoiding these materials, covering them with opaque and matte material the robot can detect, or
ensuring the robot does not operate in areas with these materials.
To Next Page
