MIR MiR250 Dynamic - Battery and Charging

6. Battery and charging
MiR250 Dynamic Integrator Manual (en) 09/2023 - v.2.1 ©Copyright 2020–2023: Mobile Industrial Robots A/S. 56
6. Battery and charging
The robot is powered by a fast swap lithium-ion battery that can be charged inside the robot with
a MiR cable charger or a MiRCharge48V charging station. Instructions for charging depend on
the charger type and are described in the guides included with each charger.
NOTICE
Do not parallel couple the battery with more batteries. Parallel coupling the batteries
will result in the batteries shutting down.
WARNING
Using a charging device different from the one supplied by the manufacturer can
cause a fire and thereby burn injuries to nearby personnel and damage to the robot
and equipment.
l
Only use an original MiR charger.