MIR MiR250 Dynamic - In Case of Fire; Warning Label

3. Safety
MiR250 Dynamic Integrator Manual (en) 09/2023 - v.2.1 ©Copyright 2020–2023: Mobile Industrial Robots A/S. 30
l
Using the robot outdoors
l
Using the robot in hygiene zones
l
Using MiR top modules that are not specifically made for MiR250
l
Using the robot together with an external radio module that in any way results in
simultaneously active radio transmitters
The following list gives examples of custom modules that are foreseeable misuse of MiR250
Dynamic:
l
Top modules (including the payload) that increase the physical dimensions of MiR250 Dynamic
l
Conveyors (powered and non-powered)
l
Industrial robot arms
l
Devices that tow carts
l
Customized load transfer stations
l
Top modules or modifications that use additional antennas or result in transmitting radio
signals simultaneously with the existing radio module
3.6 In case of fire
It is highly recommended to include MiR250 Dynamic in the local contingency plan.
The Battery safety data sheet has information that is useful when creating the contingency plan
including recommended fire extinguish media. You can find the safety data sheet on
MiRSupportPortal.
3.7 Warning label
MiR250 Dynamic is supplied with a warning label that specifies that it is strictly prohibited to ride
on the robot.
The label must be placed on the robot or top module so that it is clearly visible.