MIR MiR250 Dynamic - Packing the Robot for Transportation

15. Transportation
MiR250 Dynamic Integrator Manual (en) 09/2023 - v.2.1 ©Copyright 2020–2023: Mobile Industrial Robots A/S. 157
15.2 Packing the robot for transportation
Before packing the robot for transportation:
l
Shut down the robot—see "Shutting down the robot" on page41.
l
Disconnect the battery—see "Disconnecting the battery" on page61.
Use the original packaging materials when transporting the robot.
Figure 15.1 The packing materials
The packaging materials are:
l
The bottom of the box (the pallet)
l
The lid of the box (the ramp)
l
The walls of the box
l
Protective foam blocks: Side blocks and the top layer
l
Protective corner braces
To pack the robot, repeat the steps in "Unpacking MiR250 Dynamic" on page32 in the reverse
order.