MIR MiR250 Dynamic - Unboxing; In the Box; Unpacking Mir250 Dynamic

4. Unboxing
MiR250 Dynamic Integrator Manual (en) 09/2023 - v.2.1 ©Copyright 2020–2023: Mobile Industrial Robots A/S. 32
4. Unboxing
This section describes how to unbox MiR250 Dynamic.
To be able to use MiR250 Dynamic hardware version 2.0, the robot must be running software
version 2.14.2 or higher.
4.1 In the box
l
The MiR250 Dynamic robot
l
One Emergency stop box
l
Two external antennas
l
ASICKsafety laser scanner optics cover cleaning cloth
l
A MiR250 Dynamic document folder with the following printed documents and materials:
l
MiR250 Dynamic Integrator Manual
l
The Declaration of Incorporation for your product
l
Passwords
l
Warning label
l
Mandatory daily cleaning and tests required of SICK nanoScan3
4.2 Unpacking MiR250 Dynamic
Keep the original packaging for future transportation of MiR250 Dynamic.
To unpack the robot, follow these steps:
1 Place the box with the robot so that there is at least three meters of free space at the
front or the back of the box. This is necessary as the robot drives out of the box on a
ramp.