MIR MiR250 Dynamic - Transporting the Battery

15. Transportation
MiR250 Dynamic Integrator Manual (en) 09/2023 - v.2.1 ©Copyright 2020–2023: Mobile Industrial Robots A/S. 158
NOTICE
Pack and transport the robot in an upright position. Packing and transporting the
robot in any other position voids the warranty. You can find our warranty policy on
MiR Support Portal.
15.3 Transporting the battery
Lithium-ion batteries are subject to special transportation regulations according to United
Nations Regulation of Dangerous Goods, UN 3171. Special transport documentation is required
to comply with these regulations. This may influence both transport time and costs. Different
regulations apply depending on the mode of transportation.
When transporting lithium-ion batteries:
l
Transport the batteries in their original packaging. If there is no original packaging, we
recommend using a lithium-ion battery storage box.
The robot can be used as original packaging, provided the battery is disconnected from the
robot and is securely locked in the robot. If you enabled the fast-swap feature on the robot,
you must revert the configuration to how it was when you received the robot so the status light
bracket keeps the battery in place even when the battery is disconnected from the robot.
l
Do not expose the battery to direct sunlight.
l
Do not expose the battery to temperatures above 35°C.
l
Do not expose the battery to air humidity above 85%.