MIR MiR250 Dynamic - Page 35

4. Unboxing
MiR250 Dynamic Integrator Manual (en) 09/2023 - v.2.1 ©Copyright 2020–2023: Mobile Industrial Robots A/S. 35
6 Place the lid of the box so that you can use it as a ramp. Align the lid so that it is flush
with the base of the box.
7 Connect the Emergency stop box to the Auxiliary emergency stop interface, and mount
it to one of the mounting holes. Use a T45 screwdriver to unscrew the mounting screw,
and tighten it to 15Nm when remounting it with the Emergency stop box.