Configuring Softkeys
The Outgoing Redial List is a stored log of your outgoing calls. You can use the Outgoing Redial key to
access a list of the most recent calls you placed.
Configuring a Outgoing Redial Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Redial.
4. In the Label field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
6. Click Save Settings.
7.20 Conference Key
Using the Mitel Web UI, you can assign the Conference key to any key on the left or bottom keys on the
phone.
Configuring a Conference Key Using the Mitel Web UI
Version 1.0
User Guide 100
To Next Page
Loading...
