Additional Features
1. Click on Basic Settings > Preferences > General.
2. The XML Beep Support field is enabled by default. To disable this field, uncheck the box.
3. Click Save Settings.
12.5 Status Scroll Delay
Using the Mitel Web UI, you can specify a scroll delay option that allows you to set the time delay, in
seconds, between the scrolling of each status message on the phone. You can specify this setting in the
Status Scroll Delay (seconds) field at the path Basic Settings > Preferences > General. The default
time is 5 seconds for each message to display before scrolling to the next message. You can increase
or decrease this time as required. Setting and saving the value in the Mitel Web UI applies to the phone
immediately.
Configuring Status Scroll Delay
1. Click on Basic Settings > Preferences > General.
2. Enter a value in the Status Scroll Delay (seconds) field. Valid values are: 1 to 25 seconds. Default is 5
seconds.
3. Click Save Settings to save our changes.
Version 1.0
169 User Guide
To Next Page
Loading...
