Additional Features
2. The Call Hold Reminder field is disabled by default. To enabled this field, check the box.When this
feature is enabled, the reminder ring splash timer starts as soon as you put a call on hold (even when
no other calls are active on the phone). The phone initiates a reminder ring splash periodically for the
single call on hold. When disabled, no reminder ring splash is audible.
3. Click Save Settings.
12.9 Call Waiting Tone Period
You can specify a specific time period (in seconds) for the call waiting tone to play at regular intervals on
an active call using the parameter Call Waiting Tone Period. A value of 0 is the default and plays the call
waiting tone only once on the active call. When the incoming caller hangs up, the call waiting tone stops on
the existing active call.
You can enable or disable this feature in the Mitel Web UI.
Configuring Call Waiting Tone Period
1. Click on Basic Settings > Preferences > General.
2. In the Call Waiting Tone Period field, enter a time period, in seconds, that the call waiting tone will
be audible on an active call when another call comes in. Default is 0 seconds.When enabled, the call
waiting tone plays at regular intervals for the amount of time set for this parameter. For example, if set
to 30 the call waiting tone plays every 30 seconds. When set to 0, the call waiting tone is audible only
once on the active call.
3. Click Save Settings.
12.10 Preferred Line and Preferred Line Timeout
The 6915 has two parameters called preferred line and preferred line timeout. If you enable the preferred
line parameter on your phone, after a call ends (incoming or outgoing), the display switches back to the
preferred line. Next time you go off-hook to make another call, you pickup on the preferred line. You can
enable the Preferred Line parameter using the Mitel Web UI at the location, Basic Settings > Preferences
Version 1.0
User Guide 172
To Next Page
Loading...
