Customizing your phone
The Brightness Level option on the IP phone allows you to set the amount of light that illuminates the
LCD display. Use this option to set the preference of brightness level.
The Brightness Timer option allows you to set the amount of time you want the LCD display to stay
illuminated before turning the backlight off during a period of inactivity. For example, if you set the
brightness timer to 60, when the phone reaches 60 seconds of inactivity, the LCD backlight goes off.
Note:
The Backlight timer/mode can be configured using the configuration files and the IP Phone User
Interface (UI).
Setting the Brightness Level and Timer Using the IP Phone UI
1.
Press on the phone to enter the Options List.
2. Navigate to the Display option and press the select button or Select softkey.
3. Press the down navigation key twice to highlight Brightness Level.
4. Use the left and right navigation buttons to increase or decrease the intensity of brightness on the LCD.
5. Press the down navigation key to highlight Brightness Timer.
6. Enter a value, in seconds, using the dialpad keys. You can set the timer from 1 to 36000 seconds.
Default is 600 (10 minutes).
7. Press the Save softkey to save your changes.
6.12 Dialing
Live Dialpad
The Live Dialpad option on the IP phone turns the live dialpad mode on or off. With the live dialpad feature
enabled, the 6915 IP phone automatically dials out and turns on handsfree mode as soon as a dialpad key
or softkey is pressed. With live dialpad disabled, if you dial a number while the phone is on-hook, lifting the
receiver or pressing the initiates a call to that number.
Version 1.0
User Guide 68
To Next Page
Loading...
