Configuring Softkeys
1. Click on Operation > Softkeys and XML.
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Phone Lock from the list of options.
4. Click Save Settings.
Note:
You can lock/unlock the phone using the new key you just configured, using the Mitel Web UI at
the path Operation > Phone Lock, or using the Phone Lock option on the IP phone UI at the path
Options > Lock > Phone Lock.
7.24 Paging Key
You can configure a Paging key on the phone that allows you to send a Real Time Transport Protocol
(RTP) stream to pre-configured multicast address(es) without involving SIP signaling. You enter a multicast
IP address(es) and a port number for the Paging key, that when pressed, initiates an outgoing multicast
RTP session. This is called Group Paging on the IP phones.
You can also specify group paging RTP addresses that the phone listens for when receiving RTP streams.
You can specify up to 5 listening multicast addresses at the path, Basic Settings > Preferences > Group
Paging RTP Settings.
Configuring a Paging Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.
Version 1.0
103 User Guide
To Next Page
Loading...
