Configuring Softkeys
7.22 Intercom Key
You can use the Intercom key to automatically connect with a remote extension for outgoing calls, and to
answer an incoming intercom call.
Configuring an Intercom Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML.
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Icom.
4. In the Label field, enter a label to apply to this key.
5. In the Value field, enter the predefined number you wish to be dialed when the Intercom key is pressed.
Note:
If no value is defined, you will need to manually enter a number after pressing the Intercom key.
6. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
7. Click Save Settings.
7.23 Phone Lock Key
You can configure a key on the IP phone to use as a lock/unlock key. You assign the function of the key as
Phone Lock.
Configuring a Phone Lock Key
Version 1.0
User Guide 102
To Next Page
Loading...
