Customizing your phone
6.8 Lock
Password
This category allows you to change the user password for your phone. Changing your password ensures
that only you can alter your phone settings and helps keep your system secure. You can change your user
password using the IP phone UI or the Mitel Web UI.
CONFIGURING A USER PASSWORD
If unsupported characters are present in the user password or if the password length exceeds 15
characters in the configuration file then the phone uses the default password. The default password for
user is blank.
The following full character sets are supported:
• 0-9
• A-Z
• a-z
• +.:;=_,-'&()$!*/@
Note:
User password does not support space and pound in the configuration file.
Setting a User Password Using the IP Phone UI
1.
Press on the phone to enter the Options List.
2. Navigate to the Lock > Password option and press the select button or Select softkey.
3. In the Current Password: field, enter the current user password.
4. In the New Password: field, enter the new user password.
5. In the Re-enter Password: field, re-enter the new user password.
Version 1.0
User Guide 52
To Next Page
Loading...
