Handling Calls
7. Press the Conf softkey again to add Party 3 to the conference. Party 2 and Party 3 will connect with you
to form a conference call.
8. To drop a party from the conference, use the up and down navigation keys to highlight the desired party
and press the Drop key.
Creating a Conference Call by Joining Two Existing Calls
1. Ensure you are on an active call with one of the parties with whom you wish to create a conference (the
other party should be placed on hold).
Note:
Direct conferencing can be performed in either the Multi-View Call screen or Detailed View Call
screen.
2. Press the up and down navigation keys to highlight the party you wish to conference in.
Version 1.0
User Guide 130
To Next Page
Loading...
