Managing Calls
4.
From the entry column, press the navigation key to display the contact’s details screen.
You can use the up and down navigation keys to scroll through the list of numbers or press the right
navigation key to move to the address column and scroll through the contact’s addresses using the up
and down navigation keys.
5.
Press the softkey configured with Directory functionality, key, or Quit softkey to exit.
Performing a Search
Search functionality is applied across all the available and enabled directories. Pressing on any dialpad key
initiates the search. After entering the first few letters of the contact’s first name, last name, or company
name, you can then quickly select a contact and perform the desired action. If external Directory sources
are configured and enabled, you can select a contact from the consolidated “All” folder to perform an
action, or navigate to the contact in the specific Directory folder to perform the desired action.
Use the following procedure on the phone’s UI to perform a search.
Note:
Depending on how your Administrator has configured the search functionality, you may need to press
a Search softkey in order to execute the search function.
1.
Press the softkey.
2. Using the dialpad keys enter in the letters of the desired contacts’ first name, last name, or company
name. If no external Directory sources are configured or enabled, search matches will be displayed on
the left column with any additional numbers for the respective contact displayed on the right. If external
Version 1.0
135 User Guide
To Next Page
Loading...
