Managing Calls
1. From the Home screen, press the DND softkey. The screen displays a list of the accounts on the phone
and allows you to enable/disable a specific account or all accounts.
2. Use the up and down navigation keys to scroll through the accounts and press the select button to
enable DND for the selected account.
Note:
Press the All On or All Off softkeys to quickly enable or disable DND for all accounts.
3. Press the Save softkey to save your changes.
Call Forward Configuration
Call Forward on the IP phone allows incoming calls to be forwarded to another destination.
On the 6915, you can set Call Forward on the phone-side for a specific account or for all accounts on the
phone. You can set a Call Forward mode using the Mitel Web UI at the path, Basic Settings > Preferences
> General > Call Forward Key Mode: Account (default), Phone, and Custom. Call Forward behaves
according to the mode you set.
You can configure Call Forward using the Mitel Web UI at the path, Basic Settings > Account Configuration,
or you can configure Call Forward using the IP phone UI at the path, Options > Call Forward.
Using the Mitel Web UI at the path, Operation > Softkeys and XML, you can also configure a Call Forward
key for the phone to use as a shortcut for accessing the Call Forward menu on the phone.
The following describes the behavior for each Call Forward mode.
• Account (default): The Account mode allows you to configure Call Forward on a per account basis.
Pressing a configured Call Forward key applies to the account in focus.
• Phone: The Phone mode allows you to set the same Call Forward configuration for all accounts (All,
Busy, and/or No Answer). When you configure the initial account, the phone applies the configuration to
all other accounts. (In the Mitel Web UI, only the account you configured is enabled. All other accounts
are greyed out but set to the same configuration.) Using the Mitel Web UI, if you make changes to that
initial account, the changes apply to all accounts on the phone.
• Custom: The Custom mode allows you to configure Call Forward for a specific account or all accounts.
You can configure a specific mode (All, Busy, and/or No Answer) for each account independently or
Version 1.0
User Guide 158
To Next Page
Loading...
