Customizing your phone
3. Use the up and down navigation keys to scroll through and highlight the desired region. Valid values
are:
• America
• Asia
• Atlantic
• Australia
• Europe
• Pacific
• Others
4. With the desired region highlighted, move to selection column.
5. Use the up and down navigation keys to scroll through and choose the time zone that applies to your
area. The default time zone is US-Eastern.
Note:
For a list of the time zone values available on the IP phone, see “Appendix A - Time Zone Codes”
6. Press the Save softkey to save your changes.
Set Date and Time
Configuring the Date and Time Using the IP Phone UI
With a valid time server enabled your IP phone will synchronize the time displayed with the specified
configuration server. The phone will use the time from Time Server 1 unless it is not configured or
unavailable, in which case it will move on to Time Server 2, and if necessary Time Server 3.
1.
Press on the phone to enter the Options List.
2. Navigate to the Time and Date > Set Date and Time option and press the select button or Select
softkey.
Version 1.0
47 User Guide
To Next Page
Loading...
