26
3 CONNECTORS USED FOR ROTARY SERVO MOTOR WIRING
3.1 Selection of connectors
3 CONNECTORS USED FOR ROTARY SERVO
MOTOR WIRING
The HK-RT_4W will be available in the future.
• The indicated IP rating is the connector's protection against ingress of dust and water when the connector is connected to a
rotary servo motor. If the IP rating of the connector and rotary servo motor varies, the overall IP rating depends on the
lowest IP rating of all components.
• The fitting warranty is applied only to the option cables and the connectors manufactured by the manufacturers introduced
in this manual.
3.1 Selection of connectors
Use the connector configuration products given in the table as the connectors for connection with the rotary servo motor.
Refer to the following for the compatible connector configuration products.
Page 28 Wiring connectors (connector configuration A)
Page 29 Wiring connectors (connector configurations B/C/D/E)
HK-KT/HK-RT (1.0 kW - 2.0 kW) series
Rotary servo motor Wiring connector
For encoder For electromagnetic brake For power supply
HK-KT_ Connector configuration A
HK-RT103(4)W
HK-RT153(4)W
HK-RT203(4)W
Power supply/brake/encoder connector
To Next Page
Loading...
