2
[Installation/wiring]
[Installation/wiring]
[Maintenance]
DISPOSAL OF WASTE
Please dispose of this product and other options according to your local laws and regulations.
WARNING
● To prevent an electric shock, turn off the power and wait for 15 minutes or more before starting wiring
and/or inspection.
● To prevent an electric shock, ground the rotary servo motor securely.
● To prevent an electric shock, any person who is involved in wiring should be fully competent to do the
work.
● To prevent an electric shock, do not attempt to wire the rotary servo motor until it has been mounted.
● To prevent an electric shock, do not touch the conductive parts.
CAUTION
● To prevent injury, do not touch the rotor of the rotary servo motor during operation.
● To prevent injury, transport the products correctly according to their mass.
● To prevent injury when handling the rotary servo motor, do not touch sharp edges such as the sharp
edges of the rotary servo motor and the shaft keyway with bare hands.
WARNING
● To prevent an electric shock, any person who is involved in inspection should be fully competent to do
the work.
To Next Page
Loading...
