Mitsubishi 4G1 series General Information

4G1 ENGINE (E-W) -
Rocker Arms and Camshafts
11A-8a-5
PWEE9520
E
Nov. 1995Mitsubishi Motors Corporation
(4) Remove the lash adjuster from the container. Then, push
down the steel ball gently and push the plunger to eliminate
diesel fuel from the pressure chamber.
Caution
Make sure the oil hole in the side of the body is pointing
toward container A. Do not point the oil hole at yourself
or other people.
(5) Place the lash adjuster in container B. Then, gently push
down the internal steel ball using special tool MD998442
and move the plunger through 5 to 10 strokes until it
slide smoothly. This operation will clean the lash adjuster’s
pressure chamber.
Caution
The steel ball spring is extremely weak, so the lash
adjuster’s functionality may be lost if the air bleed
wire is pushed in hard.
(6) Remove the lash adjuster from the container. Then, push
down the steel ball gently and push the plunger to eliminate
diesel fuel from the pressure chamber.
Caution
Make sure the oil hole in the side of the body is pointing
toward container A. Do not point the oil hole at yourself
or other people.
(7) Place the lash adjuster in container C. Then, gently push
down the internal steel ball using special tool MD998442.
Caution
Do not use container C for cleaning. If cleaning is
performed in container C, foreign matter could enter
the pressure chamber when chamber is filled with
diesel fuel.
(8) Stand the lash adjuster with its plunger at the top, then
push the plunger downward firmly until it moves through
its greatest possible stroke. Return the plunger slowly,
then release the steel ball and allow the pressure chamber
to fill with diesel fuel.
PWEE9520-D
E
Aug. 2000Mitsubishi Motors Corporation Added
MD998442
Diesel fuel
MD998442
Diesel fuel
MD998442
Diesel fuel
MD998442
Diesel fuel
MD998442
Diesel fuel

Mitsubishi 4G1 series Specifications

General

Brand	Mitsubishi
Model	4G1 series
Category	Engine
Language	English