4G1 ENGINE (E-W) -
Special Tools
11A-2-1
PWEE9520
E
Nov. 1995Mitsubishi Motors Corporation
2. SPECIAL TOOLS
Tool Number Name Use
MB990767 End yoke holder Holding camshaft sprocket when loosening or
tightening bolt (used with MD998715)
MB991614 Angle gauge Installation of crankshaft bearing caps
MB991653 Cylinder head bolt
wrench (10)
Removal and installation of cylinder head bolts
MB991659 Guide-D Guide for removal and press-fitting of piston
pins
MB991671 Valve stem
installer
Press-fitting of valve stem seals
(SOHC 16-VALVE, DOHC)
MD998011 Crankshaft rear oil
seal installer
Installation of crankshaft rear oil seal
MD998054 Oil pressure switch
wrench
Removal and installation of oil pressure switch
MD998304 Crankshaft front oil
seal installer
Installation of crankshaft front oil seal
MD998305 Crankshaft front oil
seal guide
Guide for installation of crankshaft front oil seal
PWEE9520-D
E
Aug. 2000Mitsubishi Motors Corporation Revised