SERVICE PUBLICATION & TRAINING
INTERNATIONAL AFTER-SALES DEPARTMENT. MITSUBISHI MOTORS CORPORATION
1MSB–02E11–505
SERVICE BULLETIN
NO. : MSB–02E11–505
DATE : 2002–09–20 <MODEL>
EC
LANCER
CK0A
<M/Y>
95–05
SUBJECT : 4G1 ENGINE CRANKSHAFT BOLT – CHANGE TO
TORQUE AND TIGHTENING PROCEDURE
(EC)SPACE
95–05
TORQUE AND TIGHTENING PROCEDURE
0
GROUP : ENGINE DRAFTNO. : 02EN510
CORRECTION
INTERNATIONAL
Ć
Ć
DEPARTMENT
T. Kobayashi – Manager SERVICE
PUBLICATION & TRAINING
1. Description:
This Service Bulletin informs you of the change that has been made to the tightening torque
for the 4G1 engine’s M12 crankshaft bolt. The tightening procedure for the upsized M14 crankshaft
bolt is also contained here in addition to the new tightening torque and procedure for the existing
M12 crankshaft bolt.
2. Applicable Manuals:
Manual
Pub. No. Page
ENGINE 4G1 (E–W)
Workshop Manual
PWEE9520-F (English)
PWES9521-F (Spanish)
PWEF9522-F (French)
PWEG9523-F (German)
PWED9524-F (Dutch)
PWEW9525-F (Swedish)
11A-1-4
11A-3-1, 1a, 1b, 3, 4
ENGINE
Workshop Manual
PWEH9903R-E (English,
Spanish, Swedish)
PWEK9904R-E (French,
German, Dutch)
11A-1-4
11A-3-1, 1a, 1b, 3, 4