12
12-13
• Clean other parts than the element, O-ring and gasket to be re-
placed with washing oil.
[Installation]
• Replace the element, O-ring and gasket with new ones, respec-
tively.
• Install the oil filter case so that the drain plug is positioned as
shown in the illustration.
• With the oil filter installed, start the engine and ensure that there
is no oil leakage through the gasket.
• If oil is leaking, remove and reinstall the oil filter.
• Stop the engine and check the engine oil level.
• Add engine oil if the engine oil level is low.
To Next Page
Loading...
