15-56
Disassembly sequence
Installation sequence
Follow the removal sequence in reverse.
Tightening torque (Unit: N·m {kgf·m})
Installation procedure
Installation: Rubber cushions
• Tighten the rubber cushions until they are compressed to the il-
lustrated dimension.
Mark Parts to be tightened Tightening torque Remarks
Bolt (lower front pipe mounting) 44
± 10 {4.5 ± 1.0} –
Nut (upper front pipe mounting) 85 to 110 {8.7 to 11.0} –
1 Spring
2 Washer
3 Clamp
4 Lower front pipe
5 Washer
6 Seal ring
7 Gasket
8 Upper front pipe
9 Gasket
10 Rubber cushion
11 Exhaust pipe clamp bracket
*
a: Diesel Particulate Filter
*
b: Turbocharger coupler
: Non-reusable parts
EXHAUST PIPE <EXCEPT FS>
To Next Page
Loading...
