12-12
1. Oil Filter Replacement
Tightening torque (Unit: N·m {kgf·m})
Lubricant and/or sealant
WARNING
• Wipe up any spilled engine oil, as it can cause fires.
• To avoid any risk of burns, take care not to touch the engine oil when the engine is hot.
CAUTION
• Make sure not to put any engine oil on the belt when working on the oil filter. Belts soiled with oil or
grease may easily slip, resulting in deteriorated performance of the cooling system.
• Do not reuse the oil filter elements by washing.
• Install the gasket, taking care not to twist it.
[Removal]
• Remove the drain plug and drain the oil out of the oil filter.
Mark Parts to be tightened Tightening torque Remarks
– Drain plug (oil filter) 24.5 ± 4.9 {2.5 ± 0.5} –
– Center bolt 63.7 ± 4.9 {6.5 ± 0.5} –
Mark Points of application Specified lubricant and/or sealant Quantity
– Oil filter
Engine oil
API classification CD, CD/SF, CE,
CE/SF, CF-4 or JASO classification
DH-1, DH-2
4 to 4.5 dm
3
{4 to 4.5 L}
ON-VEHICLE INSPECTION AND ADJUSTMENT
To Next Page
Loading...
