Mitsubishi 6M70 - Oil Filter Disassembly and Assembly

12-22
Disassembly sequence
1 Drain plug
2 Center bolt
3 Washer
4 O-ring
5 Oil filter case
6 Gasket
7 Oil filter element
8 Spring
9 Engine oil bypass alarm switch
10 Oil filter head
11 O-ring
*
a: Oil cooler
:
Non-reusable parts
Assembly sequence
Follow the disassembly sequence in re-
verse.
WARNING
• Wipe up any spilled engine oil, as it can cause fires.
• To avoid any risk of burns, take care not to touch the engine oil when the engine is hot.
CAUTION
• When adding engine oil, be careful not to allow engine oil to smear the belt. A belt smeared with oil will
slip, resulting in reduced cooling efficiency.
• Do not reuse the oil filter elements by washing.
• Install the gasket, taking care not to twist it.
Tightening torque (Unit: N·m {kgf·m})
Mark Parts to be tightened Tightening torque Remarks
Drain plug 24.5 ± 4.9 {2.5 ± 0.5} –
Center bolt 63.7 ± 4.9 {6.5 ± 0.5} –
Engine oil bypass alarm switch 49 ± 4.9 {5.0 ± 0.5} –
OIL FILTER