13-80
Disassembly sequence
1 Fuel hose
2 Fuel cut valve
3 Connector
4 Plug A
5 O-ring
6 Plug B
7 O-ring
8 Drain plug
9 O-ring
10 Cover
11 O-ring
12 Float
13 Element
14 Body
: Non-reusable parts
Assembly sequence
Follow the disassembly sequence in re-
verse.
WARNING
• Fuel is highly flammable. Keep it
away from flames and sources of
heat.
• Thoroughly wipe up any spilled fu-
el. Otherwise, it may catch fire.
CAUTION
• Be careful not to damage the case.
Tightening torque (Unit: N·m {kgf·m})
Lubricant and/or sealant
Special tools
Mark Parts to be tightened Tightening torque Remarks
Fuel cut valve 35 {3.6} –
Plug A 12.3 ± 2.5 {1.3 ± 0.3} –
Plug B 17.2 ± 2.5 {1.8 ± 0.3} –
Drain plug 1.47 ± 0.3 {0.15 ± 0.03} –
Cover 19.6 ± 2.5 {2.0 ± 0.25} –
Connector 40 {4.0} –
Mark Points of application Specified lubricant and/or sealant Quantity
O-ring Engine oil As required
Mark Tool name and shape Part No. Application
Filter wrench MH063201 Removal and installation of cover
WATER SEPARATOR
To Next Page
Loading...
