Mitsubishi 6M70 - To Perform System Inspection; To Use Drive Recorder Function; To Extend the Multi-Use Tester Test Harness

00-24
(1.1) To perform system inspection
• Move the starter switch to the LOCK position.
• Connect PC installed , , -A a
nd
as shown.
• Conn
ect
-A connector to the Multi-Use Tester connector on
the vehicle.
(1.2) To use drive recorder function
• Move the starter switch to the LOCK position.
• Connect PC installed , , -A
, -C,
-D and
as shown.
• Conn
ect
-C connector to the Multi-Use Tester connector on
the vehicle.
• Connect the cigarette lighter plug
of
-D to the cigarette light-
er socket on the vehicle.
(1.3) To extend the Multi-Use Tester test harness
• Connect to -A to extend the test harness to use the
Multi-Use Tester outside the vehicle.
DIAGNOSIS CODES