13
13-63
8. Water Separator Element Replacement
Tightening torque (Unit: N·m {kgf·m})
Lubricant and/or sealant
Special tools
[Removal]
• Loosen plugs A and B and then loosen the drain plug. Next, dis-
charge fuel from the water separator.
• Us
ing
, remove the cover.
WARNING
• Fuel is highly flammable. Keep it away from flames and
sources of heat.
• Thoroughly wipe up any spilled fuel. Otherwise, it may
catch fire.
CAUTION
• Use care not to damage the cover.
Mark Parts to be tightened Tightening torque Remarks
– Drain plug 1.47 ± 0.3 {0.15 ± 0.03} –
– Cover 19.6 ± 2.5 {2.0 ± 0.3} –
– Plug A 12.3 ± 2.5 {1.25 ± 0.3} –
– Plug B 17.2 ± 2.5 {1.75 ± 0.3} –
Mark Points of application Specified lubricant and/or sealant Quantity
– O-ring Engine oil As required
Mark Tool name and shape Part No. Application
Filter wrench MH063201 Removal and installation of cover
To Next Page
Loading...
