13
13-61
6. Fuel Filter Replacement
Tightening torque (Unit: N·m {kgf·m})
Lubricant and/or sealant
Special tools
[Removal]
• Drain fuel from the case by loosening the drain plug.
• Us
ing
, remove the case.
WARNING
• Fuel is highly flammable. Keep it away from flames and
sources of heat.
• Thoroughly wipe up any spilled fuel. Otherwise, it may
catch fire.
CAUTION
• Be careful not to damage the case.
[Installation]
• Clean the surface of the fuel filter head and case where the O-
ring is to be mounted.
Mark Parts to be tightened Tightening torque Remarks
– Drain plug 2 ± 0.5 {0.2 ± 0.05} –
– Case 18 to 20 {1.8 to 2.0} –
Mark Points of application Specified lubricant and/or sealant Quantity
– O-ring Engine oil As required
Mark Tool name and shape Part No. Application
Filter wrench MH063201 Removal and installation of case
To Next Page
Loading...
